Esacode

Docs / Blocks / Telemetry

Telemetry

Reads live data from running blocks and feeds the visualizers (a view can also take a block's live telemetry directly).

Live data from running blocks Telemetry Version 1.0

How it works

Connect the telemetry output of any block that runs on a worker (every such block has one). Choose how often to read and which channels to keep (empty = all). Connect the output to charts, tables, the 3D view or text to watch the run while it happens. A view can also be wired straight to a block's Live telemetry output; use this block to filter channels or read several blocks at once.

Inputs

InputTakesWhat it is
Live data
from
Live telemetry Takes several connections.

Outputs

OutputGivesWhat it is
Stream
stream
Stream

Settings

SettingDefaultWhat it does
Read every (seconds)
interval
1 How often the page reads new values while the run goes on (0.2 s for driving a robot by hand, 1 s is plenty for charts)
From 0.2 to 60
Channels
channels
empty Comma-separated names; empty keeps all
Keep the last (points)
keep
2000
From 10 to 100000

Where it runs

Its settings are used by the blocks connected to it; see Blueprints.